Becken BECM2493 Manual De Instrucciones página 10

• Place the steel mesh into the metal funnel (with no coffee in the
steel mesh). Make sure the tube on the funnel aligns with the
groove on the appliance, then insert the funnel into the appliance as
indicated by the "INSERT" mark, and then fix it firmly into the coffee
maker by turning it anticlockwise until it is fully locked.
• Place an espresso cup (your own cup) on the removable drip plate.
Make sure the knob is on the "
NOTE: the appliance is not equipped with a jug, please use your own
jug or coffee cup.
• Connect to the power source, press the ON/OFF switch. The power
indicator (red) will be illuminated.
• Turn the knob to the "
when there is water flowing out, close the pump by turning the knob
again to the "
higher position which is the "
as the appliance begins to preheat until the coffee indicator is
illuminated, which shows that the preheating has finished. Turn the
knob to the "
• After about one minute, turn the knob to the "
brewing, you can pour the water into several containers, then clean
them thoroughly, and after that you can start brewing.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you
preheating the appliance before making coffee, including the funnel,
filter and cup, so that the coffee flavour cannot be influenced by the
cold parts.
• Remove the detachable tank and open the tank cover to fill it with
the desired water. The water level should not exceed the "MAX"
mark in the tank. Then place the tank properly in the appliance.
10
AF Manual Instruç o ̃ e s Má q uina de café A5 EN 3mm.indd 10
" position.
" position, the pump will pump water,
" position, making sure the steam button is on the
" position and wait for a moment
" position again, and the water will flow out.
" position to stop
02/09/16 10:58