Bionaire BCH9212 Manual De Instrucciones página 7

Ocultar thumbs Ver también para BCH9212:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Trouble
Heater
☛ The thermostat automatically
cycles ON
turns the heater on and off
and OFF
to maintain selected comfort
frequently.
level.
☛ Every 10-15 minute the
heater turns on and runs for
a minute.
Remote (if
☛ Battery low.
applicable)
Does not
☛ Distance too far.
work
☛ Control Panel Display dirty.
Heater is
☛ When the heater is in
Blowing
Thermostat Mode and
Cold Air.
reaches the set temperature
it will automatically perform
a 15 second cool down
(blowing cold air) to ensure
thermostat accuracy.
☛ Unit is in the Fan Only
setting.
☛ Power Button may have
been pressed to turn off the
heater.
Fan Speed
☛ Max/2 and Auto settings
Doesn't
control the heat output of the
Change.
heater and not the fan
speed. Fan runs at the same
speed on all settings.
Unexpected
☛ You may hear a popping or
Noise.
crackling sound as the
heater heats up. This is
normal and safe operation.
Once the heater heats up,
the crackling sound will go
away.
Unexpected
☛ There may be an odor or
Smell.
vapor coming from the
heater the first time you use
it or after prolonged or
seasonal storage.
All manuals and user guides at all-guides.com
Troubleshooting for your Heater
Probable Cause
Solution
✔ To make this occur less frequently turn
the Dial Wheel right to the highest setting.
✔ This is normal operation to ensure the
heater is maintaining the room temp
accurately.
✔ Change battery (Disc type, 3 volt,
CR2025).
✔ Remote works up to 6m (20').
✔ Be sure to point remote at control panel
on heater and there are no obstructions.
✔ Make sure display panel is clean.
✔ Raise the temperature higher or change
setting to Auto or Max/2.
✔ Press the Max/2 or Auto Buttons.
✔ Press the Power Button to turn on the
heater.
✔ Run heater in Max/2 for maximum heat
output.
✔ If the noise persists, please contact your
local authorized distributor for Bionaire
appliances.
✔ This is normal and is the result of dust or
other debris accumulating on the heating
element. Make sure the heater is in a well
ventilated area and continue running until
the odor or vapor goes away.
7
Tabla de contenido
loading

Este manual también es adecuado para:

Bch9221

Tabla de contenido