Using The Detachable Blower For "Blowing - Workshop WS0400DE1 Manual Del Usuario

Using the Detachable Blower
for "Blowing"
Two suggested methods of using the
blower are:
1. Insert the round end of the blower wand
into the blower port of the detachable
blower and turn clockwise to lock.
- OR -
2. The Wet/Dry Vac may also be used
for blowing using the seven-foot hose
supplied with the Wet/Dry Vac. Install
the locking tab end of the Vac hose
in the blower port of the detachable
blower.
For added control, an extension wand
and/or car nozzle can be added to the
opposite end of the hose.
The unit is ready
applications.
Note: It is advisable to wear safety
equipment when using the Blower, such
as Safety Goggles and Dust Mask.
With power cord plugged in, turn the Vac
"ON" by sliding the power switch towards
the "I". To turn "OFF", slide the power
switch towards the "O".
OPERATION
for blowing
(continued)
11
Goggles
Dusk Mask
"ON"
"OFF"
Switch
Detachable
Blower Port
TURN ACCESSORY
CLOCKWISE TO LOCK
Blower
Wand
"ON"
"OFF"
Switch
Car Nozzle
Hose