Emptying The Drum; Blowing Feature - Workshop WS0400DE1 Manual Del Usuario

Emptying the Drum

WARNING:
!
To reduce the risk of injury from
accidental starting, unplug power
cord before emptying the drum.
Detachable
Blower
Handle
Powerhead
Assembly
Dust Drum
Latch (2)
1. Unplug Power Cord from power source.
2. To remove the powerhead assembly
to empty contents of the dust drum,
simply lift the two drum latches on the
side of the Vac and lift the powerhead
assembly up and off the dust drum and
set to the side.
3. Dump the drum contents into the proper
waste disposal container.
4. The Dust Drum should be emptied and
cleaned before storing your Vac.

Blowing Feature

Your Wet/Dry Vac has a "detachable
blower." It has the capability to be used
as a dedicated blower for yard work, patio
cleanup, and garage applications to blow
dust and other debris.
1. Familiarize yourself with the detachable
blower portion of your Wet/Dry Vac.
2. Remove the detachable blower of
your Vac by pressing down on the
detachable blower latch under the
handle of the detachable blower and lift
by the handle to remove.
OPERATION
(continued)
WARNING:
!
Always wear
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
WARNING:
!
To reduce the risk of injury to
bystanders, keep them clear of
blowing debris.
CAUTION:
!
Wear a dust mask if blowing creates
dust which might be inhaled.
CAUTION:
!
To reduce the risk of hearing damage,
wear ear protectors when using the
Vac/Blower for extended time or in a
noisy area.
Detachable
Blower
Detachable Blower
Carry Handle
Detachable Blower
Latch
Detachable
Blower
Carry Handle
10
safety eyewear