Description And Components Location; Basic Programming - Pentair AUTOTROL 255 LOGIX 740 Guia Del Usuario

User Guide 255 / LOGIX 740-760
3.3.

Description and components location

Outlet
Drain
3.4. Bypassing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
Normal
operation
4 . Programming

Note:
After 30 seconds without a button press, the unit returns to normal operation.
4.1.

Basic programming

Note: 
At any time, press
Menus are displayed in a defined and incremental order.
Time setting and winter time - summer time change
A
Press when the time of the day is displayed.
→
Time flashes.
B
Adjust displayed time with
C
Press to validate the selection and advance to the next parameter.
Day of week
D
Press .
→
Arrow flashes.
E
Select displayed day with
F
Press to validate the selection and advance to the next parameter.
6 / 36
Controller
Injector screen
Locking bar
DLFC
Inlet
In
to return to the home screen.
and .
and .
DOWN button
SET button
Manual REGEN button
Out In
LCD display
UP button
Out
In Bypass
Ref. MKT-UG-001 / C - 08.10.2019