Description And Components Location; Basic Programming - Pentair AUTOTROL 368 Guia Del Usuario

User Guide 368 / 604-606
3.3.

Description and components location

Drain
Outlet
Meter cable
AC adapter connection
3.4. Bypassing
The system must be equipped with a bypass. If a problem occurs, turn the valves to bypass the system as shown in the picture
below.
In
Normal
operation
4 . Programming
Note:
After 5 seconds without keypad input, the unit returns to normal operation mode and display the time of day.
4.1.

Basic programming

Note:
has two different functions according to the controller used:
for 604 controllers: the function is the day interval setting;
for 606 controllers: the function is the volumetric capacity setting.
Time of day
A
Press until desired hour appears then release.
→
Range from 0 through 23 hours.
→
The elapsed minutes will reset to zero when the hours are changed.
Brine dosage
A
Press until desired brine dosage appears then release.
→
Range from 0.2 kg to 6.0 kg;
from 0.2 kg to 1.0 kg by increments of 0.05 kg;
from 1.0 kg to 3.0 kg by increments of 0.1 kg;
from 3.0 kg to 6.0 kg by increments of 0.5 kg.
Time clock regeneration (604 only)
A
Press until desired interval appears then release.
→
Range from 0 through 30;
0 = Disabled;
0.3 = Regeneration every 8 hours : at 2, 10 and 18 hours;
0.5 = Regeneration every 12 hours : at 2 and 14 hours;
1 - 30 = Regeneration every X days (every 3 days in this example).
6 / 40
Inlet
Brine
Refill flow controller
Out
Display
Regen button
Camshaft indicator
Injector screen
Delayed regen indicator
Flow indicator (606 only)
In
In Bypass
Ref. MKT-UG-007 / D - 09.10.2020
Regen setting button
Salt button
Time button
Out