Tabla de contenido
Idiomas disponibles
Idiomas disponibles
User Guide Fleck 9000-SXT
3.3.
Description and components location
Drain
Brine
Meter
Inlet
Outlet
3.4.
By-passing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
4 .
Programming
Note:
The controller must be plugged to be programmed.
After 5 minutes without any button pressed, the unit returns to normal operation without saving.
4.1.
Basic programming
Note:
Menus are displayed in a defined and incremental order.
Day of Override
Note:
Determine the maximum number of days of operation without regeneration.
Regeneration time
A
Press
and
B
Select the number of days of Override with
C
Press
to validate the selection and advance to the next parameter.
Note:
Determine the time of regeneration.
D
Adjust the regeneration time with
E
Press
to validate the selection and advance to the next parameter.
6 / 36
Normal operation
Softening System
In
Out
simultaneously for 5 seconds to enter the menus sequence.
and
Softening System
In
and
.
.
Display
Down button
Up button
Regeneration button
In Bypass
Out
Ref. MKT-UG-020 / A - 09.05.2018
Tabla de contenido
