Overheating Protection; Residual Heat Warning; Using The Timer - Kunft KVH3935 Manual De Instrucciones

Placa vitrocerámica
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

overheating Protection

The hob is fitted with an internal temperature sensor. When the
sensor detects excessive heating, the ceramic hob will switch off
automatically.

residual Heat Warning

When the hob has been in use for some time, there will be some
residual heat. The letter "H" appears to warn you not to touch the
zone.
auto Shutdown
another safety feature of the hob is the auto shut down. This occurs
whenever you forget to switch off a cooking zone. The default
shutdown times are shown in the table below:
Power level
Default running timer (hour)

using the timer

you can use the timer in two ways:
• Either as a minute minder. In this case, the timer will not turn off the
cooking zone when the timer runs out.
• Or you can set it to turn one or more cooking zones off when the
time runs out.
• You can set the timer for up to 99 minutes.
using the timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the hob is turned on.
Note: you can use the minute minder even if no cooking zones
are selected.
2. Touch the timer control. The timer indicator will show
"--".
3. Set the timer by touching the "-" or "+" controls. The
minute minder indicator will start flashing and will
show on the timer display.
Hint: Touch the "-" or "+" timer control once to decrease or increase
by 1 minute.
Touch the "-" or "+" timer control longer to decrease or increase by
10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minutes.
Placa-Vitro-KVH1966-Manual-4.indd 11
ceramic hob
KVH3935
1
2
3
4
5
8
8
8
4
4
11
EN
6
7
8
9
4
2
2
2
16/04/12 19:27
Tabla de contenido
loading

Tabla de contenido