Maintenance, Storage And Transport - YATO YT-82181 Manual Original

GB

MAINTENANCE, STORAGE AND TRANSPORT

WARNING! Before proceeding with adjustment, servicing or maintenance, remove the tool plug from the mains socket. After fi n-
ishing the work, check the technical condition of the power tool by external examination and assessment of the body and handle,
electric wire, plug, operation of the electric switch, openings of the ventilation slots, sparking of brushes, loudness of the bearings
and gears, start-up and uniformity of work. During the warranty period, the user cannot install power tools or replace any elements
or components, as this will invalidate the warranty. Any irregularities observed during the inspection or during work are a signal to
carry out repairs at the service point. After fi nishing the work, the casing, ventilation slots, switches, additional handle and covers
should be cleaned, for example, with an air stream with a pressure of not more than 0.3 MPa, with a brush or a dry cloth without
the use of chemicals and cleaning liquids. Clean tools and handles with a dry clean cloth.
The product should be stored thoroughly cleaned and dried. Store the product in closed rooms. Protect against unauthorized
access. Keep proper ventilation to prevent condensation in the storage area. The storage place should protect the product from
the eff ects of weather conditions.
Transport the product in unit packaging or other hard packaging that provides protection against shocks. Protect the product from
moisture during transport.
Spare parts
A detailed list of spare parts for the product can be found in the "Download" section, in the product card, on TOYA SA website:
www.toya.pl.
O R I G I N A L I N S T R U C T I O N S
19