Idiomas disponibles
Idiomas disponibles
Instruction
1) Choose the tool No.4, install it into the glow plug, use hammer to fix the socket with the glow plug
head, then try to remove the glow plug with 3/8" drive socket.
2) This tool is especially for the situation when removing the glow plug, but there is only head is
removed, then please use the other accessories to remove the rest of the glow plug from glow plug
hole and replace a new one.
3) Insert No.6 tube into the glow plug hole, then insert a No.10 3.5 mm drill into No.6 tube then drill a
hole with air tool.
4) Separate the No.9 device and only choose the cone center tool and install it into the glow plug
hole. Choose suitable drill from No.2/3 (7 x 5.5 or 9 x 5.5), inert the drill into No.13 drill installer. It
is important to use No.11 (3 mm alley key) to lock the screw on drill installer. Then install it into
cone center tool and connect with air tool to drill and also remove the hex nut from glow plug.
5) Before working the next step, please use the air gun to clean all the metal scrap from drilling.
6) Choose the tab ¼"-28 UNF from No.7, insert it into No.1 T-handle. Install it into glow plug hole and
turn the T-handle clockwise for drilling. After work, just adjust the key on T-handle and remove the
t-handle anti-clockwise.
7) Choose the tool No.9, there are a hex 12 mm bolt and 30 mm hex nut and a cone center tool.
Screw the No.12 bolt (1/4"-28 UNF Hex 9 mm) into the hex 12 mm spindle and use a 9 mm
spanner to tighten the No.12 bolt. Install the cone center tool & hex 12 mm bolt into glow plug hole;
then screw the M30 hex nut properly. Use M12 spanner to fix the hex 12 bolt head and use the
M30 spanner to turn the M30 hex nut clockwise to extract the rest part of glow plug.
8) Choose a tap (M10 x P1.0 or M8 x 1.0) from No.8, install it with T-handle, and tap the glow plug
hole.
9) Remove the T-handle and replace the new glow plug.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
