Changing The Front Direction Indicator Bulbs - APRILIA ETV mille Caponord 2003 Libro De Uso Y Mantenimiento

ETVmille_ABS_UK.book Page 103 Friday, October 24, 2003 12:25 PM
PARKING LIGHT BULB
!
CAUTION
To extract the bulb socket, do not pull
the electric wires.
◆
Grasp the parking light bulb socket (7),
pull it and remove it from its seat.
◆
Withdraw the bulb (2) and replace it with
one of the same type.
All manuals and user guides at all-guides.com
2
7
CHANGING THE FRONT
DIRECTION INDICATOR BULBS
Carefully read p. 101 (BULBS).
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Loosen and remove screw (8).
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
◆
Remove the protection screen (9).
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (8) carefully, without exerting
too much pressure, in order to avoid
damaging the protection screen.
10
11
9
!
CAUTION
!
CAUTION
◆
Press the bulb (10) slightly and rotate it
anticlockwise.
◆
Extract the bulb (10) from its seat.
!
CAUTION
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
8
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
!
CAUTION
In case the bulb holder (11) comes off
its seat, align the machined bulb holder
opening with the screw seat and refit it.
use and maintenance ETV mille Caponord ABS 103