Installation; Electrical Connections And Equipotential Bonding - Cadorin DRC 700V Manual De Instrucciones Para La Instalación, La Manutención Y El Uso

Centrifugadora
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Warning! : Only qualified technicians must perform the installation, maintenance
and test of the appliance.
Warning! : Before connecting any parts of the appliance to supplies, make sure
that the latter is equivalent the requirements stated in the technical data
plate, if the appliance has been designed for these supplies.
2.2.1. ELECTRICAL CONNECTIONS AND EQUIPOTENTIAL
Warning! : The appliance is supplied to operate according to the power supply
indicated on the data plate.
− As mentioned, the appliance must be connected to the power supply by way of a
multiple pole main isolating switch and protection device, that must be proportioned to
the power of the appliance (1 mA per kW of rated power).
− The earthing system must be efficient.
− As this appliance is a type X equipment (delivery without power cable and plug), the
cable and other hardware needed to make the connection to the electrical power
supply must be provided by the installer.
− The power cable shall be of the kind described in the paragraph "Technical data" and
shall be resistant to oil.
Proceed as follows to reach the power supply terminal board:
- Cut out the power supply on the appliance by means of the switch which is installed
before the control box.
Open the wall-mounted control box by unscrewing the front screw.
-
− To make the connection, use the clamp which has been pre-arranged in the lower back part
and which is marked with the international symbol and a conductor with a nominal section of
2
<10 mm
. This connection is made among all the installed appliances and the ground system
of the building.
− The appliance must incorporate an equipotential system.
− Connect the terminal on the lower right-hand side marked with the international symbol a
connector with a nominal cross section <10 mm
system of the building shall be connected like this.
Instruction manual for installation, maintenance and use
Centrifuge DRC 700V

2.2. INSTALLATION

BONDING
2
. All the appliances installed and the earth
DRC700V-GB-00
Page
8 di 21
Tabla de contenido
loading

Tabla de contenido