Poulan Pro 221 LE Manual De Instrucciones página 8

KNOW YOURSAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Chain
Adjustment Tool Front Hand Guard
(Bar Tool)
Chain
Muffler
Bar Oil Fill Cap
Housing
Front Handle
Starter Rope
ON/STOP
Switch
Primer
Bulb
Fuel Mix Fill Cap
Cylinder Cover
Throttle
Lockout
Rear
Handle
Chain
Direction
of Travel
Throttle Choke/ Chain Chain Chain
Trigger Fast Idle Brake Catcher
Lever
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCKOUT
The THROTTLE LOCKOUT must be pressed
before you can squeeze the throttle trigger.
This feature prevents you from accidentally
squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST iDLE LEVER out to the full ex-
tent for cold starting or after refueling. The
choke provides additional fuel to the engine
during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuet to the
carburetor to provide quicker starting.
Brake Nuts Guide Bar
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN TENSION
it is normal for a new chain to stretch during first
30 minutes of operation. You should check
your chain tensicn frequently. See CHAIN
TENSION under the ASSEMBLY section.
_I_WARNING: Muffler is very hotdur-
ing and after use. Do not touch the muftler or
allow combustible material such as dry
grass or fuel to do so.