Saci pumps VSD Magnus Manual De Instalación Y Mantenimiento página 26

8 FIRST START-UP
With the keys ( ) and ( ) you can increase and decrease, respectively, the number of pumps that
are involved in each filtration cycle, leaving the rest of the pumps in the network on "standby" ,
ready to work when the alternating cycle is completed. Use the F2 key to move on to menu 1.5.
1 . 5
B a c k
With the keys ( ) and ( ) you can increase and decrease, respectively, the maximum filter pressure, which
is significant above all for detecting excess soiling in the filter or if it has burst. Use the F2 key to move on
to menu 1.6.
R e p e a t
This screen shows a sequence of starting and stopping the motor at low speed, to be able to see if the motor
is rotating in the correct direction. If it is not, the keys ( ) and ( ) invert the rotation direction.
This is the last screen of the start-up wizard, and it is the only one that must be done individually for each
of the pumps that make up the filtration pump network, as it is independent for each model. The rest of the
parameters entered in the wizard are automatically copied from one pump to the next.
M A X F I L T E R
P R E S S U R E
4 . 0 B a r
R O T A T I O N
Y E S
N O
N e x t
C O R R E C T ?
O k
VSD Magnus - [e]Magnus
27