Safety Rules - Saci pumps VSD Magnus Manual De Instalación Y Mantenimiento

Index
1 Safety rules..................................................................................21
2 Technical data..............................................................................22
3 Installation and assembly .........................................................22
4 Electrical connections ................................................................23
5 Screen format .............................................................................24
6 Main screen .................................................................................25
7 Operation mode .........................................................................25
8 First start-up .......................................................................... 26-27
9 Parameters menu (diagram) ............................................... 28-30
10 Setup menu ........................................................................... 31-36
11 Alarms ..........................................................................................37
12 Warranty ......................................................................................38
13 Disposal and environmental aspects .......................................38
14 Declaration of conformity..........................................................38

1 SAFETY RULES

Before installing and using the product:
- Carefully read the whole of this manual.
- Check that the data indicated on the plate is desired information and is appropriate for the
installation, and in particular that the nominal voltage of the pump is compatible with that of the
installation.
- The installation and maintenance must be carried out solely and exclusively by authorised
personnel, responsible for making the electrical connections in accordance with the current
safety regulations.
- The pump must not be used by people with reduced physical, sensory or mental capabilities,
or without the due experience or knowledge, except if a person responsible for their safety has
explained the instructions and supervised their operation of the pump.
- Do not let children play with the pump.
- The manufacturer accepts no liability for damage caused by improper use of the product and
shall not be held responsible for damage caused by maintenance or repairs carried out by
unqualified staff and/or with non-original replacement parts.
- The use of unauthorised replacement parts, alterations of the product or improper use shall
automatically render the product guarantee null and void.
During normal operation:
- Before removing the cover of the variator, connect the mains voltage and wait 5 minutes for the
electronic circuit board to discharge any residual voltage inside.
- Never disconnect the variator while the motor is rotating. This action can cause irreparable
damage to the speed variator and affect the other electronic systems connected to the same
electric grid.
- Although the pump is not operational, the electrical supply must still be cut off to the whole
variator for any maintenance work.
- If there are any anomalies in the installation, the speed variator can be stopped manually using
the button STOP for this purpose.
- If the inputs and outputs of the speed variator have not been wired, ensure the cable glands are
tightened properly, so that the electronics of the speed variator remain sealed from the moisture in
the room.
(Instructions based on Spanish)
VSD Magnus - [e]Magnus VSD Magnus - [e]Magnus
21