Panasonic AW-HS50E Instrucciones De Operación página 13

1. Parts and their functions
 USER buttons [USER 1, USER 2]
Any four functions selected from among the menu
items can be assigned to the USER 1 button and
USER 2 button, and then used.
The functions registered in [USER1] and [USER3]
are assigned to the USER 1 button whereas the
functions registered in [USER2] and [USER4] are
assigned to the USER 2 button.
While the SHIFT button () is held down, the
function registered in [USER3] or [USER4] can be
selected.
Button indicator ON:
The functions assigned to the USER buttons
are enabled.
Button indicator OFF:
The functions assigned to the USER buttons
are disabled.
When "[2] WIPE Menu", "[3] PinP Menu" or "[5] KEY
Adjust Menu" is displayed on the OSD menu or
when the chroma key marker is in the ON status,
these buttons function as short-cut buttons for
specific setting items.
 Refer to "1-8. Setting the USER buttons"
(<Operations and Settings> Operating
Instructions).
 SHIFT button [SHIFT]
This is pressed to call the [USER3] and [USER4]
functions which have been assigned to the USER 1
button and USER 2 button or to call the XPT6 to
XPT10 materials which have been assigned to
crosspoint buttons [1] to [5].
Button indicator ON:
The SHIFT button is enabled.
Button indicator OFF:
The SHIFT button is disabled.
(The functions executed using the SHIFT
button take effect only while the button is held
down.)
 OSD/TIME dial [OSD/TIME]
The following operations are performed using this
dial.
 When the main menu is displayed:
Turn the OSD/TIME dial to select a submenu,
and press the dial to enter the selection.
 When a submenu is displayed:
Turn the OSD/TIME dial to select a setting item,
and press the dial to enter the selection.
When the dial is turned while a setting is
blinking, the setting changes, and when the dial
is pressed, the blinking part moves to the right.
When the dial is held down while a setting is
blinking, the setting is restored to default value.
(However, the network settings are not returned
to their default values.)
 When the dial is turned while it is still held down
after the PinP ON, KEY ON, FTB ON or AUTO
button has been held down, the respective
transition duration can be changed.
 OSD ON button [OSD ON]
This selects whether the OSD menu is to be
displayed or hidden.
Each time the OSD ON button is held down, the
OSD menu is switched between displayed and
hidden.
Button indicator ON:
The OSD menu is displayed.
Button indicator OFF:
The OSD menu is hidden.
 PinP ON button [PinP ON]
This is used to combine PinP (picture-in-picture)
images for the transition duration which has been
set.
Press the button.
The button
indicator goes off.
Images can no
longer be combined.
By turning the OSD/TIME dial () while keeping
the PinP ON button pressed after the button has
been held down, the transition duration can be
changed.
12 (E)
Blinks
Image combining is
now underway.
Image combining
is now completed.
Lights
Image combining is
Press the button.
now disabled.
Lights