Sony DAR-X1R Manual De Instrucciones página 108

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

8
When you finish adding scenes, press m.
The scene list is displayed.
A Total duration of the programme
B Total number of scenes
C Scene information block
9
Select the scene information block you
want to edit using </,, and press
The sub-menu appears.
"Move": Changes the scene order using </
, and
.
"Erase": Erases the scene. When asked for
confirmation, select "OK."
"Preview": Plays the selected scene.
• To add more scenes, press M and go to step
4.
10
When you finish editing the scene list,
select "OK," and press
The display for entering the title name
appears. To enter a new name, select "Enter,"
and follow the explanations on page 50.
11
Select "OK," and press
The title name is fixed, and the display asks if
you want to start recording.
To change the disc media, select "Media" and
press M/m. To change the dubbing mode,
select "Dub Mode" and press M/m.
GB
108
12
To stop during recording
Press x REC STOP located beneath the remote
control cover.
.
Note that it may take a few seconds for the
recorder to stop recording.
To automatically adjust the dubbing mode
If there is not enough available space on the target
disc, the recorder automatically selects a dubbing
mode with lower picture quality according to the
available space. The same dubbing mode is set for
all of the titles. If disc space is insufficient for the
selected dubbing mode, the following display
appears after step 12.
.
Select "OK" and go to step 12.
If you do not want to change the dubbing mode,
select "Cancel." However, note that dubbing will
end before the programme is finished.
.
b
• If you set the beginning of the tape as the IN point and
• You cannot set a scene to be shorter than one second.
Data capacity required for the dubbing.
This is displayed in red when the size
exceeds the available space on the
dubbing target media.
Select "Start," and press
The recorder starts recording the tape contents
as programmed.
Notes
the end point as the OUT point, the IN and OUT points
may move slightly during dubbing.
.
Tabla de contenido
loading

Tabla de contenido