Changing Programme Positions Of The Recorder Using The Remote - Sony DAR-X1R Manual De Instrucciones

Manufacturer
PANASONIC
PHILIPS
PIONEER
SCIENTIFIC
ATLANTA
THOMSON
ZENITH
When you set the remote to TV mode by
pressing the TV button (the TV indicator on
the remote lights up), the remote can be used
to do the following:
Buttons
[/1
TV
TV/DVD
2 (volume) +/–
PROG +/–
Number buttons and
*1
-/--
*2
TOOLS
O RETURN
SYSTEM MENU
</M/m/, and
*2
*1
If you use the number buttons to select the TV's
programme position, press -/-- followed by the
number buttons for two-digit numbers.
*2
with a Sony TV only
GB
26
Code number
816, 826, 833, 834, 835,
855
830, 831, 856, 857, 858,
859, 860, 864
828, 829
815, 816, 817, 844
830, 831, 857, 861, 864,
876
826, 827
Operations
Turns your TV on or off.
Sets the remote to TV
mode.
Press again to cancel TV
mode.
Switches your TV's
input source.
Adjusts the volume of
your TV.
Selects the programme
position on your TV.
Selects the programme
position on your TV.
Displays the operation
menu for the current
display.
*2
Returns to the previous
mode (menu).
*2
Displays the Sony TV
menu.
Selects a menu or item,
and enters the setting.
b
Notes
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
• TV mode turns off when you do not operate the remote
for 30 seconds.
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between the
recorder and the last input source selected on the
TV. Point your remote at the recorder when using
this button.
When you connect the recorder to the TV via the
SCART jacks, the input source for the TV is set to
the recorder automatically when you start
playback. To watch another source, press the TV/
DVD button to switch the TV's input source.
Changing programme positions of
the recorder using the remote
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press "5," "0," then press
Number
buttons
.