LG WM3875HVCA Manual Del Propietário página 20

H ow to use washer
Your Steam Washer™ features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also feature
a special function (see the following page for details)
that can be activated by pressing and holding that
option button for 3 seconds.
To Add Cycle Options to a Cycle:
Turn on the washer and turn the cycle selector
knob to select the desired cycle.
Use the cycle setting buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the option
you would like to add. The cycle option buttons
will light when selected.
Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the Cycle
Guide for details.
STEAM
Use the STEAM button to add steam to
the cycle for extra cleaning power and
improved efficiency. See Steam Cycles
section for additional details.
NOTE: The steam option cannot be used with all
cycles.
DELAY WASH
Once you have selected the cycle and
other settings, press this button to
delay the start of the wash cycle. Each
press of the button increases the delay time by one
hour, up to 19 hours.
20
SPECIAL FUNCTION BUTTONS
STAIN CARE
Use this option for heavily soiled loads
that need improved stain treatment.
When STAIN CARE is selected, the
water temperature for the selected cycle will begin
as warm water to help prevent the setting of
certain types of stains. Then as the cycle
progresses, the water will be heated to higher
temperatures to help remove stains that require
treatment at higher temperatures. This option is
designed for optimum stain removal.
NOTE: If STAIN CARE is selected with the
SANITARY cycle, the cycle will begin with very hot
water since that is default for that cycle and cannot
be changed.
CUSTOM PGM
Use the CUSTOM PGM button to select
the course that you saved by using PGM
SAVE.
COLDWASH TM
Use this function to save energy by using
cold water while ensuring proper
washing. For high wash efficiency, it is
recommended to use less than 8 pounds.
FRESH CARE
Use this function when you are not able
to unload your clothes, soon after the
wash cycle ends. This function provides
periodic tumbling for up to about 8 hours to prevent
wrinkle. If you press the START/PAUSE or ON/OFF
button, you can unload your laundry at anytime.
EXTRA RINSE
This option will add an extra rinse cycle
to the selected cycle. Use this option to
help ensure the removal of detergent or
bleach residue from fabrics.
ADD GARMENTS
The add garments function will be able to add
garments during the cycle.
When the display show Add Garments, press
START/PAUSE button and add the garments.
NOTE: This function CANNOT be used when tub
temperature or water level is high and during the
spin.