Olympus PPO-EP02 Manual De Instrucciones página 20

CAUTION
1 Do not disassemble or modify this product. This may cause water
leakage or defect. In case of the loss of image data caused by
disassembly, repair or modification etc. by any party other than those
appointed by OLYMPUS CORPORATION, we shall bear no
EN
responsibility for damage.
2 Use or storage of the product at the following locations may cause
defective operation, trouble, damage, fire, internal clouding, or water
leakage. This should be avoided.
• Locations reaching high temperatures such as those under direct
sunlight, in an automobile, etc.
• Locations close to fire
• Water depths in excess of 60 m
• Locations subject to vibrations
• Locations with high temperature and humidity or with severe
temperature changes
• Locations with volatile substances
3 Opening and closing at locations with much sand, dust, or dirt may
impair the waterproof characteristic and cause water leakage. This
should be avoided.
4 This product does not soften impacts to the camera or lens in the Case
on which it is mounted. If, when the product is mounted on the Case,
the assembly is subjected to an impact or placed under heavy object,
damage to the camera or lens may result. Please handle it with
sufficient care.
5 Do not use the following chemicals for cleaning, corrosion prevention,
prevention of fogging, repair or other purposes. When these are used
for the Lens Port directly or indirectly (with the chemicals in vaporized
state), they may cause cracking under high pressure or other
problems.
EN 20 EN 20