Bosch GKE Professional 35 BCE Manual Original página 40

OBJ_BUCH-716-001.book Page 40 Tuesday, January 13, 2009 3:26 PM
40 | English
Sharpening the Saw Chain
Have your chain sharpened professionally at
your authorized Bosch after-sales service or
sharpen the chain yourself using the Bosch
sharpening kit or the Dremel Multi power tool
with the appropriate grinder (1453). Observe
the sharpening instructions provided with the
sharpening kit.
Checking the Automatic Oiler
Proper functioning of the automatic saw chain
oiler can be checked by running the chain saw
and pointing the tip of the chain bar towards a
piece of cardboard or paper on the ground. Do
not touch the ground with the chain and ensure
a safety clearance of 20 cm. If an increasing oil
pattern developes, the automatic oiler is operat-
ing fine. If there is no oil pattern despite a full oil
reservoir, see section "Troubleshooting" or con-
tact your authorized Bosch after-sales service.
After Use/Storage
Clean the moulded plastic housing of the chain
saw using a soft brush and clean cloth. Do not
use water, solvents or polishes. Remove all de-
bris, especially from the motor cooling vents.
After 1 – 3 hours of use, remove the cover 15,
the chain bar 11 and the saw chain 10, and clean
them using a brush.
Clean the area under the cover 15, the drive
sprocket 18 and the chain bar assembly from
adherant debris using a brush. Clean the oil out-
let 19 with a clean cloth.
If the chain tensioning mechanism in the cover
15 becomes difficult to operate, remove the pro-
tective lid 27, turn the locking knob 14 and the
chain-tensioning ring 13 against each other, so
that debris is loosened from the mechanism and
can be discarded. Carefully strike or tap out de-
bris from the cover 15. If the mechanism is heav-
ily clogged, use a soft brush or compressed air
for cleaning. Do not use tools of any kind.
(see figure J)
If the chain saw is to be stored for a longer peri-
od of time, clean the saw chain 10 and the chain
bar 11.
Store the chain saw in a secure, dry place, out
of the reach of children.
1 609 929 P88 | (13.1.09)
Please take care to place down the chain saw
with the oil filler cap 4 facing upward.
When storing in the sales packaging, the oil res-
ervoir must be completely emptied.
Accessories
Saw chain
for chain bar, 350 mm . . . . . . . . F 016 800 239
for chain bar, 400 mm . . . . . . . . F 016 800 240
Chain bar with saw chain
350 mm . . . . . . . . . . . . . . . . . . . F 016 800 241
400 mm . . . . . . . . . . . . . . . . . . . F 016 800 242
Additional accessories
Chain sharpening/cleaning kit . . F 016 800 263
Saw chain oil, 1 litre . . . . . . . . . 2 607 000 181
Saw chain oil, 5 litre . . . . . . . . . F 016 800 111
Protective gloves . . . . . . . . . . . . 2 607 000 134
Safety goggles . . . . . . . . . . . . . . F 016 800 178
SNR 19 hearing protection. . . . . 2 607 990 042
SNR 24 hearing protection. . . . . 2 607 990 043
Transport protection . . . . . . . . . 1 605 510 329
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Bosch Power Tools