Lenco BT-190 Light Manual Del Usuario página 7

Item Description
1 Power ON - OFF
2
Micro USB socket (DC Input: DC 5V 1A)
3 AUX IN (3.5mm Jack, Stereo)
4 NFC Sensor Position (for Bluetooth pair)
5 MIC Position (for hands-free)
6 Patterns MODE (5modes+1mode is blank-black)
/
7
AUX)
8 </v- Button (Volume down, Previous track)
9 >/+ Button (Volume up, Next track)
10 Bluetooth/Charging LED indicator
11 Hand belt
B. About the rechargeable Battery
This Bluetooth Speaker has an internal, non-user-replaceable battery. For
best results, the first time you use this Bluetooth Speaker, let it charge for
about 6~7 hours or until the charging LED indicator light from red On to
off which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn't used for a
while, the battery might need to be recharged. Charge the battery at
least once every month.
To charge the rechargeable battery:
1. Connect the Bluetooth Speaker's "Micro USB socket (2)" with the
USB power charger which able to provides output at least DC 5V 1A
for charge connection via the original USB cable (supplied).
2. The "Charge (10)" LED will turn On in red, the battery is in charging.
3. The "Charge (10)" LED will turn Off when the rechargeable battery is
fully charged.
4. Disconnect the USB cable when it is done.
Button (Play/Pause, Pick up/Hang up call/Last dialed,
7