Lenco BT-190 Light Manual Del Usuario página 10

3. Press and hold " /
4. Press " /
5. Now you have hand free function with the Bluetooth speaker.
6. Press " /
paused music will resume automatically.
Tip: speak to the "MIC (5)" direct with distance in 30~50cm to get the
best speakerphone performance when necessary.
I. Redial For Last Call Function
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the " /
playing will pause and switch to hand free function for redial.
3. Press the " /
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
J. Low Power Reminder And turn off
1. The Bluetooth Speaker will send tones sound out from speaker by
every 10 seconds to 1minute when battery still have around
20minutes working time. When you heard this reminder, please
connect the device to the USB power for charging, if you still want to
use the device.
2. If not, the Bluetooth Speaker will power Off to sleep mode when the
battery is keeping low energy level in30minutes.
K. Use AUX IN Function
In this design, the Bluetooth module give priority to Bluetooth function as
master, the AUX In function is become slave, if Bluetooth has been
connected and in playing mode.
a. Use AUX In under power ON mode: (Bluetooth un-paired)
1. Make sure that the external device has switched on and controlled to
AUX output source with music playing.
2. Turn on the unit;
3. Connect the Bluetooth Speaker's "AUX (3)" jack with an external
device's "" jack output through the Audio cable.
4. The mode will switch to "AUX IN" function automatically and the
"AUX IN (3)" LED will turn On with blinking blue. Now, the Bluetooth
Speaker's AUX In function is in use.
b. Use AUX In under Bluetooth music playing mode:
1. In Bluetooth music playing mode, connect the Bluetooth Speaker's
"AUX (3)" jack with an external device's "AUX/LINE" Output through
the Audio cable. The AUX in connected device will then play.
(7)" button to reject the call if you want. Or,
(7)" button to pick up the call.
(7)" again to hang up the call when finished. And the
(7)" button to enter into redial function, the
(7)" Button again to hang up the redial call.
10