Using Fastext To Select A Teletext Page; Setting Up Your Pc Software (Based On Windows Xp); Display Modes - Samsung LE23R3 Instrucciones Del Propietario

Using Fastext to Select a Teletext Page

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC
may be different depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all
cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
2.
3.
4.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode Resolution
IBM 640 x 480
720 x 400
VESA 800 x 600
1024 x 768
1024 x 768
1360 x 768
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
HDMI/DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.
The various topics included in the Teletext pages are colour-coded, and can
be selected by pressing the coloured buttons on the remote control.
1. Display the Teletext contents page by pressing the
TTX/MIX (
2. Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV(
First, click on "Control Panel" on the Windows start menu.
When the control panel window appears, click on "Appearance and Themes" and a
display dialog-box will appear.
When the control panel window appears, click on "Display" and a display
dialog-box will appear.
Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct
value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Horizontal
Frequency (kHz)
31.469
31.469
37.879
48.364
56.476
47.712
) button.
) button again to exit from the Text display.
Vertical
Frequency (Hz)
59.940
70.087
60.317
60.000
70.069
60.015
English-19
Pixel Clock Sync Polarity
Frequency (MHz)
25.175
28.322
49.500
65.000
75.000
85.800
(H/V)
- / -
- / +
+ /+
- / -
- / -
+ /+