NEC MultiSync ME431 Manual De Configuración página 8

Ocultar thumbs Ver también para MultiSync ME431:
Handling the power cord.
Handle the power cord with care. Damaging the cord could lead to fire
or electric shock.
• When connecting the power cord to the product's AC IN terminal,
make sure the connector is fully and firmly inserted.
• Fasten the power cord to the product by attaching the screw and
clamp to prevent loose connection. (Recommended Fasten Force:
120 - 190 N•cm).
• Do not connect or disconnect the power cord with wet hands.
• When connecting or disconnecting the power cord, pull the power
cord out by holding onto its plug.
1
• When cleaning the product, for safety purposes, unplug the power
cord from the power outlet beforehand. Regularly dust off the power
cord by using a soft dry cloth.
• Before moving the product, make sure the product power is off, then
unplug the power cord from the power outlet and check that all cables
connecting the product to other devices are disconnected.
• When you are not planning to use the product for an extended period
of time, always unplug the power cord from the power outlet.
• This equipment is designed to be used in the condition of the power
cord connected to the earth. If the power cord is not connected to the
earth, it may cause electric shock. Please make sure the power cord
is earthed properly.
Do not bind the power cord and the USB cable. It may trap heat and
2
cause a fire.
Do not connect to a LAN with excessive voltage.
When using a LAN cable, do not connect to a peripheral device with
3
wiring that might have excessive voltage. Excessive voltage on the LAN
port may cause an electric shock.
Do not climb on the table where the product is installed. Do not install
the product on a wheeled table if the wheels on the table have not been
4
properly locked. The product may fall, causing damage to the product
or personal injury.
Installation, removal, and height adjustment of the optional table top
stand.
• When installing the table top stand, handle the unit with care to avoid
5
pinching your fingers.
• Installing the product at the wrong height can cause tipping.
Please install your product at proper height to prevent personal injury
or damage to the product.
CAUTION
English-6
loading

Este manual también es adecuado para:

Multisync me501Multisync me551Multisync me651