Samsung POWERbot SR10M70 Serie Manual Del Usuario página 35

Symptom
I have installed the
Samsung Connect app, but,
the POWERbot fails to be
connected.
I fail to log into the Samsung
account.
There appears a message
saying there is a failure
during Easy-Setup.
The products do not work
even though the smart
phone is normally connected
to the POWERbot.
The functions of the
Samsung Connect App do not
work.
The Samsung Connect Robot
Vacuum App fails to get
started.
POWERbot is not connected
to Wi-Fi.
Intelligent power control
function works on a normal
floor.
Intelligent power control
function does not work.
Edge clean master function
does not work.
Edge clean master function
works though there is no wall
or corner.
The Edge clean master
function works though
the POWERbot has not
approached a wall or corner.
VR7000_EN_DJ68-00763R-00_ZS.indd 35
fYou can use the product after connecting the wireless router and
the POWERbot through Easy-Setup according to the procedure.
fCheck your ID and password on the screen of the Samsung
account.
fYou may have failed temporarily due to the distance from the
wireless router or other obstacles. Please try again after a while.
fTurn off the Samsung Connect app and then run it again, or
disconnect the smart phone from the wireless router and then
connect it again. Or turn off the power supply of the POWERbot,
turn it on, wait for a minute or longer, and then run the Samsung
Connect app again.
fCheck if the Smart control blocking function of the POWERbot
is set. (When the Smart control is locked, the Wi-Fi indicator is
turned off.)
fCheck if the POWERbot is connected to the wireless router.
fCheck the setting status of the wireless router.
fCheck whether the floor is not even and then the POWERbot works
with its body a bit lifted up.
fCheck whether there are any foreign matters on the cliff sensor
which is at the bottom of the POWERbot.
fCheck whether the floor color is dark.
fWhen the POWERbot cleans a carpet with short fibre and
bright color, it may recognize the carpet as a floor and then the
Intelligent power control function may not work.
fWhen POWERbot cannot recognize the wall, the Edge clean master
may not work.
– When an obstacle made of reflective material is in front of the
wall
– When the wall itself is made of reflective material
– When the wall is a dark color
fCheck whether small obstacles are arranged in a narrow space.
fWhen the POWERbot recognizes the front obstacle as a wall, Edge
clean master function may work.
fWhen the degree of the angle of a corner which the POWERbot
detects is large, the Edge clean master function may work without
approaching the wall or corner.
ENGLISH-35
Checklist
2017-07-07 오전 10:56:28