Steris BioShield 00711903 Instrucciones De Uso página 4

After removal of therapeutic device from instrument channel port:
•
Place cap portion of the BioShield
Notes:
•
To separate the cap portion of the BioShield
o
This separates it from the tether if necessary, for the assistant to be able to back load a device through the biopsy valve
•
biopsy valve EUS – linear can be used with or without the tether.
®
BioShield
•
Use short strokes (1"- 1½ ") to advance device through working channel.
o
Catheter based devices may not pierce the BioShield
Product Disposal:
Consumables: After use, this product may be a potential biohazard which presents a risk of cross-contamination. Handle and
dispose of in accordance with accepted medical practice and applicable local, state and federal laws and regulations.
Issued Date: June 2021
Warning: An issued or revision date for these instructions is included for the user's information. In the event one year has elapsed between
this date and product use, the user should contact STERIS to determine if additional information is available.
Unless otherwise indicated, all marks denoted with ® or ™ are registered with the U.S. Patent and Trademark Office, or are trademarks
owned by STERIS Corporation.
Serious incidents that have occurred in relation to this medical device should be reported to the manufacturer and competent authority in
the country where the incident occurred.
US Endoscopy, a wholly owned subsidiary of STERIS Corporation.
®
Olympus is a registered trademark of Olympus Optical Co., Ltd.
Made in the U.S.A.
732963 Rev. C
®
biopsy valve EUS - linear back onto the instrument channel port (See Figure 5).
Figure 5
biopsy valve EUS – linear from the echoendoscope, pull firmly on the cap.
®
biopsy valve – EUS – linear.
®
Page 4 of 39