Regalo 1175 Manual De Instrucciones página 3

Assembling and Installing Your Gate
STEP 1
LOCKING KNOB
Unfold the gate frame by turning the locking
knobs counter clockwise at each pivoting
joint. Loosen the knobs enough to allow the
gate to swing open freely without fully
removing the knobs.
Operating the Door Latch
STEP 1
METAL LIFT
LATCH
Pull both sides of the slide lock sideways away from the metal lift
latch while simultaneously pivoting the metal lift latch upward from
the gate's door frame.
STEP 2
Use a Phillips/crosshead screwdriver to fix the
wall mounting bracket to the wall. Repeat for all
four brackets.
SLIDE
LOCK
STEP 3
Arrange the panels to your desired configuration,
then tighten all of the locking knobs.
STEP 2
To relock the gate, close the door completely and drop the metal
lift latch back into place. The slide lock will return to it's locked
position on its own.
LOCKING KNOB