Assembly Instructions - Jocel JAT007391 Manual De Instrucciones

OPERATION PRESSURE CHECKED:
If the flame is very small, this is because the supply pressure is not enough. Please
refill gas cylinder.
RE-LIGHT:
1. Turn the control knob to OFF "●" position.
2. Wait five (5) minutes before attempting to relight burner.
3. Repeat steps beginning with step 2 of the lighting instruction above.
SHUT DOWN INSTRUCTIONS:
1. Push in and turn control knob clockwise to OFF "●" position.
2. Turn LPG cylinder gas valve clockwise to OFF position when heater is not in use.
NOTE: After use, some discoloration of the emitter screen is normal.
THE EVENT OF GAS LEAKAGE:
1. Turn the control knob
2. Turn LPG cylinder valve
3. Wait 5 minutes to allow gas to dissipate.
4. If odor continues, immediately call gas supplier.
Warning:
Heater will be hot after use.
Handle with extreme care.

ASSEMBLY INSTRUCTIONS

Number of people required to assemble: One person
Time to assemble: 60 min.
1. Find a large, clean area to assemble your appliance. Please refer to the parts list
and assembly diagram as necessary.
2. Please use protective gloves when assembling this product.
3. To avoid losing any small component or hardware, assemble your product on a
hard level surface that does not have cracks or openings.
4. To avoid damage to soft floor or carpet, do not assemble or move the appliance
on soft floor or carpet.
5. Follow all steps in order to properly assemble your product.
6. Make sure all the plastic protection rips off before assembling.
7. Do not force parts together as this can result in personal injury or damage to the
product. When applicable, tighten all hardware connections by hand first, once the
step is completed, go back and full tighten all hardware.
CAUTION: Whilst every effort has made in manufacture of your appliance to remove any
sharp edge, you should handle all components with care to avoid accidental injury.
to OFF "●" position.
to OFF position.
45
OFF