Component List; Technical Data; Noise Information; Vibration Information - Worx WX803. Serie Manual Original

COMPONENT LIST

1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON / OFF SWITCH
4. BATTERY PACK RELEASE BUTTON *
5. BATTERY PACK *
6. WHEEL GUARD FOR GRINDING
7. DISC
8. SPANNER
9. INNER FLANGE
10. OUTER FLANGE
11. CLAMP ADJUSTMENT NUT
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING *
*Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type WX803 WX803.X (8 - designation of machinery,
representative of Angle Grinder)
Rated voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight
(bare tool)
** X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
Lithium-Ion Cordless Angle Grinder
WX803 WX803.X**
20V Max***
8600/min
125mm
22mm
M14
1.54kg
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value
Surface grinding or
a
h,AG
abrasive cutting off
Uncertainty K = 1.5m/s2
The declared vibration total value may be used for
comparing one tool with another, and may also be used in
a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool is
used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
Type Capacity
WA3550 1.5 Ah
WA3550.1 1.5 Ah
WA3551 2.0 Ah
WA3551.1
2.0 Ah
WA3553 4.0 Ah
WA3014 4.0 Ah
WA3760 0.4 A
WA3869 2.0 A
WA3880 2.0 A
L : 86.8dB(A)
pA
K =3 dB(A)
pA
L : 97.8dB(A)
wA
K =3 dB(A)
wA
2
= 4,300m/s
EN
11