Technical Data; Component List; Noise Information; Vibration Information - Worx WX800 Manual Original

Do not burn
Make sure the battery is removed prior
to changing accessories
Do not dispose of batteries. Return
Li-I on
exhausted batteries to your local
collection or recycling point
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice

COMPONENT LIST

1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
10
3. ON / OFF SWITCH
4. BATTERY PACK RELEASE BUTTON
5. BATTERY PACK*
6. WHEEL GUARD FOR GRINDING
7. DISC*
8. SPANNER
9. INNER FLANGE
10. OUTER FLANGE
11. CLAMP ADJUSTMENT NUT
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING*
*Not all the accessories illustrated or
described are included in standard delivery.
Lithium-Ion cordless angle grinder

TECHNICAL DATA

Type WX800 WX800.2 WX800.9 (800—819
-designation of machinery, representative of
Angle Grinder)
WX800
Charger voltage 100-240V ~ 50/60Hz
Rated voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight 1.8kg
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Surface Vibration emission value
grinding or
a = 4,300m/s
h,AG
abrasive
Uncertainty K = 1.5m/s²
cutting off
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
WX800.2 WX800.9
/
20V Max**
8600/min
115mm
22mm
M14
2.1kg 1.54kg
L : 86.8dB(A)
pA
L : 97 .8dB(A)
wA
3 dB(A)
2
EN