How To Use - Erbe 20132-227 Manual Del Usuario

OBJ_DOKU-184654-006.fm Seite 23 Montag, 1. Februar 2021 11:28 11
Do not use in the presence of combustible or explosive materi-
als!
Never lay this product on the patient or in his/her direct vicinity.
Damp inside the connectors may cause flash-overs that could
damage the connector or its insulation. Ensure that the product
is dried sufficiently during processing and prevent fluids from
penetrating the connector during use. The older the material, the
greater the risk of unwanted damp in the connectors.
Protect this product from any form of mechanical damage! Do
not throw! Do not use force! If there is a cable, and unless stated
otherwise, do not kink it or wrap it around the accompanying
product!
Erbe Elektromedizin expressly warns against modifying the
product. Any modification exempts Erbe Elektromedizin from
any and all liability.
4

How to use

4.1 Only use cleaned and disinfected products
Clean and disinfect the product before using for the first time
and before every reuse.
4.2 Checking the product
Check the product for external damage before each use.
If damaged, do not use this product!
23