Preparation For Operation - GRAPHITE 58G121 Instrucciones De Uso

mproper charger assembly may cause electric shock or fire.
Disconnect the charger from a power supply before starting any maintenance or cleaning.
When the charger is not in use, it should be disconnected from the power network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Drill is a battery-powered tool. Drive consists of DC commutator motor with permanent magnets and
planetary gear. Drill is designed for screwing in and out screws and bolts in wood, metal, plastics and
ceramics, and for drilling holes in these materials. Cordless, battery-powered power tools are especially
useful for works in interior furnishing, adaptation of premises etc.
Use the powertool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Quick-release chuck
2. Torque control ring
3. Direction selector switch
4. Battery lock button
5. Battery
6. Switch
7. Gear switch
8. Light
* Slight differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUT ON
WARN NG
ASSEMBLY/SETT NGS
NFORMAT ON
EQUIPMENT AND ACCESSORIES
1. Battery
2. Charger
3. Charging station
4. Driver bits
5. Transport case
REMOVING AND INSERTING THE BATTERY
- 2 pce
- 1 pce
- 1 pce
- 1 pcs
- 1 pce

PREPARATION FOR OPERATION

15