AL-KO Garten + Hobby Comfort 38 VLE COMBI CARE Manual Del Usuario página 12

Replacing the scarifier
(picture F)
Note:
Before disassembling the blade look at
its mounting position.
1. Unscrew the hexagon bolt (1).
2. Carefully remove the ball bearing (2) from
the shaft (8).
3. Remove pressure ring (3), disk (4) and short
distance sleeve (5) from the shaft.
Help in faults
Pull the plug out and wait until the blade roller has come to a standstill before any mainte-
!
nance and cleaning work.
Fault
Motor does not run
Roller does not rotate
Motor output drops
Poor scarifying perform-
ance
Noisy running, application
vibrates
Fault, which cannot be rectified with the help of this table, may only be attended to by an authorized
company (workshop).
Accessories
Grass box
Art. No. 112 383
Stable steel frame housing with fabric basket
Volume approx. 55 l
GB 4
roller blades
Cause
No voltage
Roller blocked
Toothed belt defective.
Working depth too high
Dirty housing
Lawn too long for scarifying
Working depth too high
Worn blades
Blade damaged
4. Successively remove blade (6) and long
distance sleeves.
To re-assemble proceed in reverse order.
The disassembly of the aerator roller and re-
placement of the steel spring beaks must be
made analogously to the scarifier roller.
Remedy
Check connection line and connec-
tion protection switch
Check roller
Workshop.
Select lower working depth
Clean housing
Lawn too long for scarifying
Select lower working depth
Replace worn blade
Workshop