THERMEx ARLES Instrucciones De Montaje página 49

M 513052068216062016
1
Open the glass door and remove the filters
from the hood.
4
Push the motor toward the front of the hood
and carefully remove the hood.
NOTE: The hinges of the motor must be
removed from the edge at the front on the
hood.
7
Install the two screws on the back edge of
the lid.
10
Install a plastic flange for the exhaust on the
hood.
2
Remove the four screws that are located
behind the filters keeping the motor in
position.
5
Unplug the cable between the hood and motor.
8
x2
Install the four screws inside the hood behind
the filters.
11
Install the hood in the cabinet as described in
the section: INSTALLING THE HOOD steps
1-13.
3
x4
Remove the two screws that are on the back
edge of the motor.
6
Install the lid on the hood.
NOTE: First, position the front edge on the
hinges on the hood and push the lid back.
9
x4
Put a plastic clamp around the cable to the
motor and power supply, and install the
clamp in the hole on the lid of the hood.
12
Install the flange and brackets on the motor
housing
THERMEX ARLES
49
x2
X4