THERMEx ARLES Instrucciones De Montaje página 50

50
THERMEX ARLES
13
Put a plastic clamp around the cable to the
hood and install the clamp in the hole on the
flange.
16
Pre-drill the four holes.
19
Install the exhaust between the motor and
the hood.
14
Install a plastic flange for the exhaust on the
motor.
17
x4
Install rawl plugs in the holes.
20
Mount the exhaust from the motor and out
into the open air.
Take special care to ensure the non-return
valve can open and close freely.
NOTE: This does not apply if the hood is used
for recirculation.
15
Select a suitable location for the motor and
mark the location of the four key holes.
18
x4
Install the motor.
21
Assemble the plug between the motor and
the hood.
NOTE: Use the extension cord if necessary.
M 513052068216062016
x4
x4