Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
ENG
Drilling
Hammer drilling
Chiselling
(KHE 2443 only)
In chiselling mode, the chisel is locked so that it
cannot turn.
To position the chisel for a particular application,
set the switch button (8) between
When a chisel is fitted, only operate the
machine in the chiselling operating mode
.
Avoid levering with the machine when a
chisel is fitted.
7.4
Setting the direction of rotation, engag-
ing the transporting safety device
(switch-on lock)
Do not activate the rotation selector switch
(4) unless the motor has completely stopped.
See page 3 (please unfold).
R = Clockwise setting
L = Counter-clockwise setting
7.5
Tool Change with SDS Chuck
Before fitting, clean tool shank and
apply special grease (accessories
order no. 6.31800)! Use only SDS-plus tools.
Inserting the tool:
Turn the tool while inserting, until it engages.
The tool is automatically locked.
Removing the tool:
Turn tool lock (2) in direction indicated by arrow
(a) and remove the tool (b).
8
8 Tips and Tricks
Only moderate pressure is required for hammer
drilling and chiselling. Exerting a high force does
not increase performance.
When drilling deep holes, remove the drill bit
periodically from the hole to release the stone
dust.
Drill tiles and other brittle materials without impact.
and
.
9 Maintenance
The vent slots of the machine should be cleaned
from time to time.
10 Trouble Shooting
If the trigger (6) can not be depressed, check to
see that the direction of rotation selector switch (4)
is fully set to the R or L position.
f
11 Accessories
Use only genuine Metabo accessories.
If you need accessories, check with your dealer.
For the dealer to select the correct accessory, he
needs to know the exact model designation of
your power tool.
See page 4.
A Tools with SDS-plus shank
B Connecting piece
C Geared chuck
D Twist drills for metal and wood
E Screwdriver bit
F Carbide core cutter
G Dust extraction kit
H Special grease (for lubricating the tool shanks)
For complete range of accessories, see
www.metabo.com or the main catalogue.
12 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Capítulos
Tabla de contenido
