Video Adjust Screen - JVC TK-C1460B Instrucciones

VIDEO ADJUST Screen

Adjustments are made on video signals.
Item
WHITE
BALANCE
COLOUR
LEVEL
ENHANCE
LEVEL
PEDESTAL
LEVEL
AUTO
BLACK
CTL
Functions and set values
Selects the white balance adjustment function. The white
balance can be adjusted manually or automatically for
light within the colour temperature range of 2500K to
8000K.
• ATW: Auto-Tracking White Balance mode.
This automatically adjusts the white balance.
• AWC: Auto White Balance Controll mode. When the
SET button is pressed, the adjustment
screen appears.
( See page 37.)
MEMO
The "- - -" will appear during operation in the black-and-
white mode and any setting cannot be changed.
To adjust the colour level of the video signal.
• To make colours lighter ... Decrease the value
• To make colours darker ... Increase the value
[Set values: –5 to NORMAL to 5]
MEMO
The "- - -" will appear during operation in the black-and-
white mode and any setting cannot be changed.
To adjust the contour enhancing level of the video signal.
• To make the picture quality harder ... Increase the value
• To make the picture quality softer ... Decrease the value
[Set values: –5 to NORMAL to 5]
To adjust the pedestal level of the video signal.
• To brighten picture ... Increase the value
• To darken picture ... Decrease the value
[Set values: –5 to NORMAL to 5]
This is set when it is difficult to view a dark part of the
image even if gain is boosted by the AGC (automatic gain
control).
ON: When a black level of the image signal is low, a
pedestal level that becomes the standard of black
is automatically elevated, making it easier to view a
dark part.
OFF: AUTO BLACK does not function.
MEMO
• When PEDESTAL LEVEL is set to 5, no function can
take place even if AUTO BLACK CTL is ON.
• When AGC MODE is set to OFF, no function can take
place even if AUTO BLACK CTL is ON.
Initial value
ATW
NORMAL
NORMAL
NORMAL
OFF
E-31