Care and cleaning of the oven.
Slot
Hinge
lock
Pull hinge locks down to unlock.
Removal position
26
Lift-Off Lower Oven Door
The door is very heavy. Be careful when
removing and lifting the door.
Do not lift the door by the handle.
To remove the door:
Fully open the door.
Pull the hinge locks down toward the door
frame, to the unlocked position. A tool,
such as a small flat-blade screwdriver,
may be required.
Firmly grasp both sides of the door at the
top.
Close door to the door removal position,
which is halfway between the broil stop
position and fully closed.
Lift door up and out until the hinge arm is
clear of the slot.
To replace the door:
Firmly grasp both sides of the door at the
top.
Upper Oven Door
The upper door contains many of the
electronics and controls for the oven. It is
recommended that the upper door be removed
only by a trained service technician.
With the door at the same angle as the
Bottom
edge of
removal position, seat the indentation of
slot
the hinge arm into the bottom edge of
the hinge slot. The notch in the hinge arm
must be fully seated into the bottom of
the slot.
Fully open the door. If the door will not
fully open, the indentation is not seated
correctly in the bottom edge of the slot.
Push the hinge locks up against the front
frame of the oven to the locked position.
Hinge
lock
Close the oven door.
Hinge
arm
Push hinge locks up to lock.
Hinge arm
Indentation