Stihl KM 56 R Manual De Instrucciones página 16

English
Using the Barrier Bar
The barrier bar comes standard with the
machine and must be mounted to the
loop handle.
Mounting the Barrier Bar
1
1
2
2
5
5
3
3
Take out the screws (1) and remove
N
along with washers (2) and nuts (3).
Remove the loop handle (4) and
N
clamps (5).
14
2
Fit the square nuts (1) in the barrier
N
bar (2); the holes must line up.
4
1
1
Place the clamp (3) in the loop
N
handle (4) and position them both
against the drive tube (5).
Place the clamp (6) against the
N
drive tube.
Place the barrier bar (2) in position
N
as shown.
Line up the holes.
N
Insert the screws (7) in the holes
N
and screw them into the barrier
bar (2) as far as stop.
Go to "Adjusting and Securing the
N
Loop Handle".
Leave the barrier bar permanently
mounted to the loop handle.
2
4
3
5
6
7
7
KM 56 R, KM 56 RC