Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.
1
Press (SOURCE) to select a desired
source.
2
Press (DSO) to select "1, 2, 3" or
"OFF".
To cancel the DSO mode, select "DSO OFF."
After 3 seconds, the display returns to the
normal play mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to off.
Selecting the display mode
and display image
You can select from 3 different display modes.
You can also select various display images in
Wallpaper mode (1-2), Spectrum analyzer mode
(1-5) and Movie mode (1-3).
Note
The default setting of Auto Image mode is "A.IMG-All."
After a few seconds of releasing (IMAGE), the unit
returns to Auto Image mode. If you want to display a
display image, set to "A.IMG-off" (page 24).
Selecting the display image
1
Press (SOURCE) to select a desired
source.
2
Press (IMAGE) on the unit repeatedly
to select the desired display image.
Example: Wallpaper mode
Each time you press (IMAGE), the display
image changes as follows:
Wallpaper mode 1-2 t Spectrum
analyzer mode 1-5 t Movie mode 1-3
t normal play mode
To cancel this mode, select normal play mode.
continue to next page t
23