Fast Cooling; Eco Mode; Self-Test; Setting The Brightness Of The Control Panel - Gaggenau RC462704 Instrucciones De Uso

en-us
Operating the appliance

Fast cooling

Fast cooling cools the refrigerator compartment as cold
as possible.
Switch on fast cooling, e.g.:
Before placing large quantities of food into the
▯
compartment
For cooling drinks quickly
▯
Note: When fast cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to normal
operation.
Switching on fast cooling:
1.
To open the menu for setting the temperature, press
À button.
2. Press Û button.
When fast cooling is switched on, the symbol Û
appears on the display.
3.
The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Switching off fast cooling:
1.
To open the menu for setting the temperature, press
À button.
2. Press ã button.
When fast cooling is switched off, the symbol Û
disappears from the display.
3.
The appliance stores the setting and automatically
returns to the main screen after a few seconds.

Eco mode

Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Refrigerator compartment: +43° F (6° C)
▯
Cool-fresh container: +34° F (1° C)
▯
Switching Eco mode on or off
Press à button to open the main menu.
1.
2. Press C button to move to the menu item Eco mode.
3. Press I/& button.
The temperature is changed, and the display shows the
new temperature. When Eco mode is switched off, the
recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with A/@ buttons.
14

Self-test

This function can be used to start fault analysis on your
appliance.
~ "Appliance self-test" on page 25
Setting the brightness of the control
panel
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
Press % button to open the menu item Brightness.
4.
5. Press B C buttons to set the required brightness.
6. Press ™ button.
The setting is saved.
7. Press ' button to exit the menu.

Setting the display screen

You can choose between the settings Reduced and
Standard. With the setting Reduced only the temperature
and active special functions are displayed on the control
panel after a short period without operation. If the touch
fields are touched, all keys will be visible again.
With the setting Standard all keys always remain visible.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
4. Press C button to move to the menu item Display
screen.
Press % button.
5.
6. Press B C buttons to move to the required setting.
7. Press ™ button.
The setting is saved.
8. Press ' button to exit the menu.