Festool QUADRIVE PDC 18/4 Manual De Instrucciones página 12

PDC 18/4
GB
– Always pull the mains plug out of the socket when the charger is not in use.
– Only for AS/NZS: The tool shall always be supplied via residual current device with a
rated residual current of 30 mA or less.
1.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Drilling
Sound pressure level
Noise level
Uncertainty
Impact drilling
Sound pressure level
Noise level
Uncertainty
CAUTION
When working with noise
Damage to hearing
Always use ear protection.
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Drilling in metal
Fastening
Impact drilling into con-
crete
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
12
L = 73 dB(A)
PA
L = 84 dB(A)
WA
K = 3 dB
L = 104 dB(A)
PA
L = 115 dB(A)
WA
K = 3 dB
(vector sum for three
h
a = 5,6 m/s
h
K = 1,5 m/s
a < 2,5 m/s
h
K = 1,5 m/s
a = 12,4 m/s
h
K = 3,0 m/s
2 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
3 Technical data
Cordless impact driver
Motor voltage
Idling speed*
2
2
2
2
Torque for easy/tough fastening
applications
2
Adjustable torque**
2
Chuck clamping range
Drill diameter max.
Fastening in pine
Tool holder in drill spindle
Weight without battery pack with
Centrotec
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower
torque stages.
PDC18/4
18 V
1st gear 0 - 400 rpm
2nd gear 0 - 850 rpm
3rd gear 0 - 1850 rpm
4th gear 0 - 3800 rpm
40/60 Nm
1st gear 0,75 - 12 Nm
2nd gear 0,6 - 7,5 Nm
3rd gear 0,55 - 5 Nm
4th gear 0,5 - 2,7 Nm
1,5 - 13 mm
Wood 50 mm
Metal 12 mm
max. 8 mm
1/4 ''
1,6 kg