Tool Specifications - Bostitch SMART POINT BTFP72155 Manual De Operación Y De Mantenimiento

TOOl SPeCIFICATIONS

All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The BTFP72155 requires 1.8 cubic feet per minute or C.F.M. (51.0 liters per minute or LT/MIN) of free air
at 80 PSI (5.6 kg/cm2) to operate at a rate of 60 fasteners per minute. The BTFP72156 requires 1.9 cubic
feet per minute or C.F.M. (53.8 liters per minute or LT/MIN) of free air at 80 PSI (5.6 kg/cm2) to operate at a
rate of 60 fasteners per minute.
To determine the appropriately sized air compressor, take the actual rate at which the tool will be run and
compare the required C.F.M. (LT/MIN) to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI
(5.6 kg/cm2).
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools
C.F.M. required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your
air compressor can deliver a minimum of 0.9 C.F.M. (25.5 LT/MIN) at 80 PSI(5.6 kg/cm2) for optimum
performance of the BTFP72155.
FASTeNeR SPeCIFICATIONS
Tool Model
BTFP72155
BTFP72156
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
DA15 GA Angled Finish Nailer
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
1-1/4" - 2-1/2" (31mm - 63mm)
). Select the operating pressure within in this range for best fastener
2
Fastener Type
Fastener SKU
DA Type
Angled Finish
Nails
Angled
Finish Nails
BTFP72155
Oil-Free
)
2
DA15 Series
15 Gauge
100
12.8" (325mm)
3.8" (97mm)
12.1" (307mm)
4.22lbs (1.9kg)
Crown Width
DA1520
DA1524
DA1532
DA1540
FN1520 N/A
FN1524 N/A
FN1528 N/A
FN1532 N/A
FN1536 N/A
FN1540 N/A
-6-
BTFP72156
FN15 GA Angled Finish Nailer
Oil-Free
) 70-120 PSI (4.9 to 8.43kg/cm
2
120 PSI (8.43 kg/cm
FN15 Series
15 Gauge
1-1/4" - 2-1/2" (31mm - 63mm)
14.3" (363mm)
3.8" (97mm)
12.1" (307mm)
4.32lbs (2.0kg)
Gauge
N/A 15
N/A 15
N/A 15
N/A 15
15
15
15
15
15
15
)
2
)
2
129
Length
1-1/4" (32mm)
1-1/2" (38mm)
2" (50mm)
2-1/2" (63mm)
1-1/4" (32mm)
1-1/2" (38mm)
1-3/4" (45mm)
2" (50mm)
2-1/4" (57mm)
2-1/2" (63mm)