Acelity PREVENA INCISION Manual De Uso página 12

4. Remove bottom release liner 1 on the foam dressing to expose
adhesive seal and white fabric located on the bottom of the foam
dressing. The white fabric covers the incision.
5. Add sealing strips to the ends of the foam dressing.
NOTE: Use the PREVENA™ CUSTOMIZABLE™ Dressing to size
the sealing strip as needed to fit the width of the dressing,
approximately 3 in (8 cm).
Liner 1 must be removed from the dressing before applying
•
sealing strips.
Remove one of the liners from the sealing strip. Sealing strips
•
are tacky on both sides.
Place sealing strip on end of foam dressing (creating a
•
continuous seal). The strip should be placed half on dressing
and half off dressing and overlap the adhesive seal on each
side of the dressing. This ensures a seal all around the edge of
the dressing.
Remove the remaining liner from the sealing strip. Repeat strip
•
application on other end of foam dressing.
6. With sealing strips applied, position the foam dressing until the
adhesive seal and white fabric are facing down.
12