Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Pergola sc io
2. SAFETY
2.1. Safety and responsibility
Before installing and using this product, please read this guide carefully.
This Somfy product must be installed by a professional motorisation and home automation installer,
for whom this guide is intended.
Moreover, the installer must comply with current standards and legislation in the country in which the
product is being installed, and inform his customers of the operating and maintenance conditions for
the product.
Any use outside the area of application specified by Somfy is prohibited. This invalidates the warranty
and discharges Somfy of all liability, as does any failure to comply with the instructions given herein.
Never begin installing without first checking the compatibility of this product with the associated
equipment and accessories.
2.2. Specific safety advice
In addition to the safety instructions described in this guide, be sure to also observe the instructions
set out in the attached document "Safety instructions to follow and keep".
1) Switch off the mains supply for the blind before performing any service operation in the vicinity.
To avoid damaging the product:
2)
Never immerse it in liquid!
3)
Avoid impacts!
4)
Do not drop it!
5)
Never drill holes in it!
6)
Avoid moving the blind if ice has formed on it.
3. INSTALLATION
The Pergola sc io must be installed in a location sheltered from inclement weather.
3.1. Motor preparation
1) Fit the crown (A) and the drive wheel (B) to the motor.
2)
Measure the length (L1) between the interior edge of the
motor head and the outer rim of the drive wheel.
3.2. Tube preparation
1)
Cut the roller tube to the required length.
2)
Deburr the roller tube and remove the swarf.
3)
For smooth roller tubes, cut a notch with the following
measurements:
-
e = 4 mm
-
h = 28 mm.
38
1
OFF
3
5
1
2
L1 = ...
1
3
Copyright © 2010 Somfy SAS. All rights reserved.
2
4
6
B
A
L1
2
Ø > 47
h
e
Capítulos
Tabla de contenido
