Intended Use; Possible Misuse; Undercut Anchors - Hilti TE 60-A36 Manual De Instruccion

3 Description
3.1 Product overview
Chuck
@
Depth gauge adjustment (ac-
;
cessory)
Depth gauge (accessory)
=
Function selector switch
%
Lockbutton for sustained op-
&
eration (chiseling only)
Control switch
(
Charge-status and fault indi-
)
cator (Li-ion battery)

3.2 Intended use

The product described is an electrically powered combihammer with pneu-
matic hammering mechanism. It is designed for drilling in concrete, masonry,
wood and metal. The product can also be used for light- to medium-duty
chiseling on masonry and surface finishing work on concrete.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these
batteries.

3.2.1 Possible misuse

• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.

3.3 Undercut anchors

The product is suitable for setting undercut anchors. Use only suitable
setting tools.
Detailed information on this topic can be obtained at your local Hilti Center.
3.4 ATC
The product is equipped with the ATC (Active Torque Control) quick-acting
electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about
its own axis in the opposite direction. ATC detects this sudden pivoting
movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.
8 English
1
+
§
/
:
∙
$
£
|
Release buttons (also used
to activate the charge status
indicator)
Battery
Side handle
On/off switch
Button for half power
Half-power indicator
Service indicator
ON/OFF indicator
2201899
*2201899*