Lithium­ion Battery Status Display - Hilti TE 60-A36 Manual De Instruccion

3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.6 Quick-release chuck (accessory)
The quick-release chuck makes changing accessory tools a quick operation
with no additional tools needed. It is suitable for accessory tools with
cylindrical or hexagonal shank used in the "With hammering action
mode.
3.7 Service indicator
The product is equipped with a service indicator LED.
3.7.1 MMI
Status
The Service indicator lights up.
The Service indicator flashes.
The ON/OFF indicator lights up.
The ON/OFF indicator flashes.
The ON/OFF indicator is off.
The Half power indicator lights up.
The Half power indicator is off.
3.7.2 Lithium­ion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are
indicated by the display on the Li­ion battery. The Li­ion battery state of
charge is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED flashes, the product is not in
working order.
4 LEDs flash, the product is not in
working order.
*2201899*
Meaning
Servicing is due.
Have the product repaired by Hilti
Service.
The product is switched on
The product is switched off be-
cause of a transient fault.
The product is switched off.
The product is working at half
power.
The product is working at full
power.
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
2201899
"
English 9