Technical Data And Table Symbols; Duty Cycle - Furius FIRE 215 Manual De Instrucciones

4.

TECHNICAL DATA AND TABLE SYMBOLS

Details
• Voltage 110 / 220V 50 / 60Hz.
• DC output current, recommended for 6010, 6011, 6013, 7018 1/8" electrodes.
• Scraped TIG.
• ARC FORCE, HOT START and MMA.
• DIGITAL DISPLAY.
• 210A (FW215), 250A(FW285) DC.
• 60% duty cycle at 40 ° C *.
Input Voltage
110V / 220V – 1ph
(+/- 10%)
Min. recommended fuse
25A

Duty cycle

Duty cycle is the percentage of time that the welding machine can deliver continuous welding
current, in a period of 10 minutes. In the Furius FIX 251 this value is 40% when the output current is
set at the maximum and the ambient temperature is 40 ° C. This percentage increases as the set
output current decreases and / or the ambient temperature decreases.
This means that the machine can deliver its maximum output continuously for 6 minutes, and after
this period the thermal control device will be activated, and the user must let the machine rest (it
should be left turned on) at least for 4 minutes. After this period, you can resume work normally.
The duty cycle may decrease if the ambient temperature rises above 40 ° C.
Warning! Do not exceed the
duty cycles established on the
tech plate included in the
welder and in this instruction.
Frequency Open Circuit
Voltage
50/60 Hz 85V
Output Insulation
current class
type
DC I.CL.H
Output Current Output Current
Range 220V Range 110V
20–210A (FW215) 20-140 A
20–250A (FW285)
IP
IP 21 S
Duty Cycle
at 40°*
60%
Weight
Kg
11