Risk Induced By Electromagnetic Fields; Warning - Furius FIRE 215 Manual De Instrucciones

Risk induced by electromagnetic fields

The circulation of current in the welding process generates electromagnetic fields that can affect devices such as
pacemakers or other medical implants.
• Workers with medical implants must not use the product.
• Never wrap the welding cables around the body.
• Keep the welding cables close to each other and parallel to decrease the intensity of the generated magnetic
field.

WARNING

• Keep the workplace clean and tidy, disorganized and poorly lit places can cause accidents. Be prudent,
before starting work consider all the requirements to carry out your work. Do not operate the welder
when you are tired or under the influence of medication, alcohol and / or drugs.
• Professional training is required to operate the machine.
• The welding machine is not suitable for use in rain or snow.
• Use labor protection welding supplies authorized by the Department of Homeland Security.
• The operator must be qualified personnel with a valid operation certificate of "metal welding
operations".
• Turn off the power before performing maintenance.
• Only qualified personnel by UJUETA MÉXICO, S.A. DE C.V., can repair the welder. Uncovering and
handling the machine can lead to serious risks. Seek help from the nearest Authorized Service Center if
you find fault with equipment operation.
• Be sure to consider the special requirements for working in spaces with risk of fire or explosion.
• Never weld bicycle frames or ratchets, parts of vehicle steering, trailer tow bars, etc.
• Make sure the machine is adequately ventilated, do not locate it too close to walls with a minimum
separation of 10 cm. Do not rest the machine on the vents. Do not place the machine in a lateral and
horizontal position. The welder is not designed to be mounted on racks or on trolleys. Placing the welder
at inclinations greater than 10 ° from the horizontal may result in its overturning.
9